NewTech Composite Decking

Click here to request a quote - we offer VERY competitive pricing!

NewTech's composite decking is made from recycled plastics and natural fibers (rice hulls), making them 100 % recyclable.

WPC's have advantages over traditional wood products. In General they are more durable, weather-resistant, impervious to rot and wood eating organisms, easy to maintain and flexible for design and appearance specifications. They represent the newest trends in the building materials market.

Produced in China by Meixin Manufacturing. NewTech's goal is creating WPC products to revolutionize and improve the building products industry.

With better materials and advanced processing techniques, NewTech WPC decking is free from conventional wood problems such as splitting, warping and decay. Reducing the cost and need for replacement or repairs. Here are a few valuable benefits when choosing NewTech WPC decking for your home or business.

. Environmentally friendly -100% Recyclable
. Saving time - easy maintenance and installation
. Longer usage/life cycle - resistant to rot and wood eating organisms
. Stronger and more flexible than traditional wood products
. Standard woodworking tools can be used

Characteristic Comparison-WPC's and Other Materials
Characteristics	Wood	Plastic	WPC's
Load Capacity
Worked with Carpentry Tools
Durability
Water Absorption
Weather Resistance
Chemical Resistance
Low Maintenance
Design Flexibility

Click here to request a quote - we offer VERY competitive pricing!

NewTech's WPC process uses a variety of cellulose materials, which are of the highest quality to ensure that our products have a more natural look and feel than composites made from purely recycled materials. warranty

Due to variations in the manufacturing process we recommend that composite decking materials be purchased in one lot and to allow an overage in the materials you will need for your projects to maintain a uniform look. NewTech composite Decking and Railing will lighten over time and these color variations are not covered under the manufacturers warranty.

We have also provided a user-friendly, quick clip system to install our decking to provide a clean, smooth look to your deck by not having those unsightly nail/screw heads showing. This system also helps in providing a uniform spacing between your deck boards allowing for easier installation.

Click here for photo gallery of NewTech composite decking

NewTech Composite Decking's Strength

PHYSICAL , MECHANICAL AND THERMAL PROPERTIES
Property
Property	ASTM	PSI	MPA
Tensile Strength	D638	1806	12.45
Bend Strength	D790	3084	21.26
Bend Modulus	D790	275181	1897.31
Flexural Strength	D6109	2781	19.79
Flexural Modulus	D6109	302032	2082.44
HDT 264	D648	212	1.46
Specific Gravity	D729	0.8-1.2
Nail Withdrawal	D1544	802
Water Absorption	D1037	1.26%
Shore D Hardness	GB2411-80	68

Seven standard color shades are available for each style of our deck boards.

The framing and foundation of decking are the keys to a successful and long-lasting installation. It is always recommended that you consult your local building codes and installation expert for span recommendations when planning for decks with hot tubs, planters, grills, etc.

When fastening deck boards to the joists using the traditional method, a minimum of two nails should be used to fasten the boards to the joists and a minimum of three nails at the end of each board. Screws/nails need to be sunk flush with boards. Do not over drive or leave the nail/screw heads above the top surface of the boards. Screws/nails should be driven within one inch (1) from the end and edge of the boards.

For optimum results, fasten from center of plank out. End joints must all terminate on a joist. The framing segments should be doubled to help provide a competent fastening surface.

Color options for decking